HT-ESE-SW-BM1 - Healtech Switchable exhaust servo eliminator module BMW
ES Eliminator SW
Switchable exhaust servo eliminator module
The ESE-SW is a special version of the Exhaust Servo Eliminator that lets you take control of the stock exhaust servo motor and valve. Now you can either fully open or close the exhaust valve with the supplied switch or let it work in stock mode for street use.
Plug 'n Go
Comes with model-specific connectors, no splicing/soldering is required. Just plug it in and enjoy the ride!
3 switch positions
Now you can either fully open or close the exhaust valve on your bike. Or leave it in stock mode – you decide.
Quick and easy installation
It connects in line with the original servo motor, installation is super-quick and straightforward.
Introduction
The Switchable Exhaust Servo Eliminator (ESE-SW) is a special version of the highly successful Exhaust Servo Eliminator (ESE). It connects in line with the servo actuator motor and allows the rider to take full control of the servo motor and exhaust valve. This comes in handy for instance when the bike is used on public roads and for track riding/racing as well. The rider can fully open the exhaust valve (even while riding) by toggling the supplied (handlebar) switch. What are the benefits of such a setup? With the ESE-SW the bike remains fully road-legal, while on the track you are not hindered by the servo motor/exhaust valve by any means. Should you need to make the bike as quiet as possible, just close the exhaust valve and the noise is gone.
Features
Three (3) working modes
With the ESE-SW you can fully open, leave in stock working mode or fully close the exhaust valve with the supplied switch – even while riding.
You are in safe hands
The unit is completely sealed and epoxy encapsulated, which gives extreme protection for the internal parts from shocks, vibrations and water. All units have been extensively tested before shipment.
Plug 'n Go installation
The Plug 'n Go connector makes installation quick and easy, eliminating the need to alter the bike's original wiring. Just locate the exhaust servo motor under the rider/passenger seat, disconnect the plugs, plug the ESE-SW in line with the servo motor, find a suitable place for the switch (handlebar preferably) route the cable of the switch and that's it, and you're ready for the ride!
What's an Exhaust Servo & EXUP valve?
For the last two decades bikes have been equipped with an exhaust flap valve (also called as EXUP valve) to improve low down torque with the hindering of the flow of escaping gasses creating back pressure in the exhaust system. As the revs rise and the more you open the throttle, this valve opens more and more so the gasses can leave unblocked. This valve and its housing is welded after the header's downpipes right before the collector pipe and/or the collector chamber/catalytic converter so removing this alone from the factory system is not worth the time, the money and the effort itself since the OEM system in the most cases is still low quality and heavy as hell. Of course, titanium OEM systems exist but finding an exhaust shop with titanium welding capabilities isn't easy and will cost you an arm and a leg in labour to remove the exhaust valve from the system. So it's easier and gives much better result to opt for an aftermarket end-can or whole system. Either way you take, you will need an Exhaust Servo Eliminator to complete the job properly!
Other information:
Compatible Motorcycles:
- BMW M 1000 R (23-25)
- BMW M 1000 RR (20-25)
- BMW R 1200 GS (04-18)
- BMW R 1200 GS Adventure (06-18)
- BMW R 1200 R (05-19)
- BMW R 1200 R Classic (11-12)
- BMW R 1200 RS (15-18)
- BMW R 1200 RT (05-18)
- BMW R 1200 S (06-12)
- BMW R 1200 ST (04-08)
- BMW R 1250 GS (19-23)
- BMW R 1250 GS Adventure (19-24)
- BMW R 1250 R (19-24)
- BMW R 1250 RS (19-24)
- BMW R 1250 RT / Sport (19-24)
- BMW R 1300 GS (24-25)
- BMW R 18 (21-24)
- BMW R 18 B - Transcontinental (22-24)
- BMW R NineT (14-24)
- BMW R NineT Pure (17-24)
- BMW R NineT Racer (17-20)
- BMW R NineT Scrambler (16-24)
- BMW R NineT Urban GS (17-24)
- BMW S 1000 R (14-25)
- BMW S 1000 RR (09-25)
- BMW S 1000 RR HP4 (12-15)
- BMW S 1000 XR (->2019) (15-19)
- BMW S 1000 XR (2020->) (20-25)
| Bike - Brand | BMW |
|---|---|
| Bike - Type | Off-Road, Road |
| Bike - Model | M 1000 R, M 1000 RR, R 1200 GS, R 1200 GS ADVENTURE, R 1200 R, R 1200 RS, R 1200 RT, R 1200 S, R 1200 ST, R 1250 GS, R 1250 R, R 1250 RS, R 1250 RT, R 1300 GS, R 18, R NINE T, S 1000 R, S 1000 RR, S 1000 XR |
| Bike - Year | 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
Manufacturer / Responsible Person for the EU
Manufacturer
Company Name:
HealTech Electronics Ltd.
Address:
Déli Ipari út 31
5630 Békés
HU
Email Address:
support@healtech-electronics.com
Responsible Person for the EU
Company Name:
FASTER96 srl
Address:
Via Pradazzo, 1/a
40012 Calderara di Reno
IT
Email Address:
info@faster96.com
-
HT-ESE-BM1 - Exhaust Servo Eliminator HealTech BMW R 1200 GS / R / RS / RTSpecial Price €53.87 Regular Price €63.00 -14%