ECE / UN 22-05
The approval is valid only for the countries of the European Union
Outer shell: SCLC (Super Complex Laminate Construction)
The most innovative aerospace fibers, with 30% more resistance in extension and bending than standard glass fibers, make up the majority of the SCLC shell. While much more expensive than most glass fibers (and many carbon fiber materials), this "super fiber" offers incredible flexibility and strength while maximizing shell integrity. A specially designed "mechanically expanded fiber mat", sandwiched between the inner and outer lining of Arai's patented super fiber laminate, is used to reinforce and bond these two super fiber layers without adding significant weight to the helmet.
Designed for increased airflow and reduced noise, it allows fresh air to enter inside.
Fresh air can enter directly into the forehead area and temples without the need to drill holes in this critical area of the shell and in the impact liner.
Three-position ventilation hole on the chin guard
The three-position ventilation hole on the chin guard helps demist the visor and ensures fresh air for the user.
Neck air exhaust
To improve the escape of hot air from the inside. Increases the effect of ventilation in the lower part of the helmet.
One-piece rear air vent
It extracts more hot air from inside the helmet and improves aerodynamics.
Rear ventilation: Side air outlets
They create low pressure behind the rear ventilation hole for better hot air extraction. Integrated into the shell for better aerodynamics, they reduce noise and avoid vibrations due to speed. Inside, a small foam rubber barrier helps absorb and reduce excessive noise, without compromising the effectiveness of ventilation.
Effectively prevents fogging and condensation on the visor, even in extremely humid conditions. It can be easily cleaned and replaced.
Interchangeable internal cheek pads
The cheek pads can be easily removed. All interiors (even non-removable ones) can be washed with warm water and neutral soap. Rinse well after washing and never dry in direct sunlight or near heat sources. All removable interiors can be customized with different sizes / thicknesses to adapt perfectly to the user's head.
- Remove by removing the front side first
- Reposition by inserting the back first
The inner cap can be easily removed. All interiors (even non-removable ones) can be washed with warm water and neutral soap. Rinse well after washing and never dry in direct sunlight or near heat sources. All removable interiors can be customized with different sizes / thicknesses to adapt perfectly to the user's head.