E15-7024 - Dynojet Wide Band 2 Kit including POD-300 digital display

Wide Band Commander 2

STOICHIOMETRIC RATIO DIGITAL READER

The Wide Band Commander 2 ( WB2 ) is a universal "stand alone" data acquisition device that allows the stoichiometric ratio ( AFR ) to be detected during engine operation together with the engine rpm (RPM) and throttle position (TPS).

For its precision, versatility and ease of use it is one of the most widely used data acquisition tools in the world and recommended by different data acquisition system manufacturers.

This tool can be used on 4-stroke vehicles powered by petrol, diesel, methane, ethanol, LPG, alcohol installed on cars, motorcycles, trucks, ultralight vehicles, marine vehicles.

The code E15-7024 (base module + Display POD-300) is the only one that allows data to be stored.

The code E15-7003 (includes DAQ cable) is not complete with POD-300 and is designed for use in combination with separate control units or an analog or digital instrument that is designed to accommodate.

It is also possible to pair the POD-300 Display.

The Output O2 narrow band function allows you to provide a lambda narrow band probe emulation output signal. This function is provided, for example, to be able to remove the original lambda probe and exploit the existing hole, and provide a useful signal to the original control unit. This output signal is programmable.

Note: The management/programming of this function requires the POD-300 display.

It is possible to connect an analogue or digital instrument for displaying the AFR value in real time on the instrument panel.

By connecting the WB2 to a Power Commander 5 (PCV) control unit, you can take advantage of the Autotune auto-mapping function.

It will be necessary to add to the kit:
n.1 – CAN cable connecting to the PCV
n.1 – CAN Terminal Connector

By connecting the WB2 to a PCV unit it is possible to set the POD-300 Display to acquire the Turns/Motor (RPM) and Accelerator Position (TPS) signal from the PCV itself without having to connect the two inputs of the WB2.

THE INSTALLATION KIT INCLUDES:

• 3 Current-stealing clamps
• 1 Faston connection
• 2 Velcro adhesive strips
• 1 Buffer with alcohol
• 3 Plastic ties
• 2 Dynojet Stickers
• Product registration postcard
• Assembly Instruction

Available accessories

• Cod. POD-300 - Display Display and data storage + cable
• Tax E15-7018 - Analogue instrument with White background, diam. 52mm, connection cable included
• Tax E15-7019 - Analogue instrument with Black background, diam. 52mm, connection cable included
• Tax E15-7020 - Digital tool with White background, diam. 52mm, connection cable included
• Tax E15-7021 - Digital tool with Black background, diam. 52mm, connection cable included
• Cod. 76950114 - DAQ cable for data acquisition connection
• Cod. 76950118 - DAQ cable + Analogue/Digital instrument
• Cod. 76423025 - CAN Terminal Connector
• Cod. 76950145 - CAN cable length 15cm.
• Cod. 76950143 - CAN cable length 45cm.
• Cod. 76950117 - Cable CAN length 90cm.

TECHNICAL FEATURES:

• Analog output 0-5v linearized (for external data acquisition)
• Single-wire RPM connection, both inductive and capacitive ignition (CDI)
• Analog input 0-5v (TPS, MAF, boost, etc.)
• "Go/No go" test to verify lambda probe operation
• Robust cable packaging and cover for years of trouble-free use
• Dynojet CAN-Link communication – allows you to connect optional expansions

PRODUCT SPECIFICATIONS:

• Power supply 11.5 – 15 VDC, 3rd Dimensions cm 7.11 x 1.42 x 3.78 – Width: 0.68 Lambda – ambient air
• Input: analog 0-5 VDC – digital square wave, 0-12v nominal (coil (-) tachometer signal)
• Output: 0-5v Analog Calibrated to Instrument, 0-5v Analog AFR Calibrated, Simulated Narrowband, Dynojet CAN-Link (optional cable required)
• The Wide Band 2 module can also be installed on vehicles without a battery, as long as it is connected to a power supply with a voltage not exceeding 15 VDC.

Other information:

Compatible Motorcycles: