Christmas Sales
Use the following code:
CHRISTMAS-SALES

Full Face Helmet Arai CONCEPT-XE Ha Yellow

As low as $614.75 Regular Price $723.24
SKU
AR3610HY
In stock
select product options to view shipping times
Estimate Shipping Cost
Full face motorcycle helmet, ECE R22-06 approval, the look of the 1980s with the most current safety and performance standards.
Original Product Arai
Images are to be considered for demonstration purposes only and may not represent the actual product.
ECE R22-06

Please Note:
The approval is valid only for the countries of the European Union

SizeXXXSXXSXSSMLXLXXLXXXL
Circumference49/5051/5253/5455/5657/5859/6061/6263/6465/66

Concept-XE

The 1980s. Naked motorcycles. An attitude that made you feel different from everybody else. Introducing the Concept-XE. Recalling the simple yet aggressive style of that era, this helmet came from the heart of Arai R&D. They loved the looks, but that was about it. Now, the Arai techs want old-school cool, to fit their style and motorcycle, but they want cool with modern Arai performance.

Concept-XE’s brute simplicity is the product of imagination, but make no mistake, while the retro style may grab attention it had to pass Arai’s stringent in-house testing. So underneath the aggressive look you’ll find a strong, lightweight PB e-cLc shell, with a smooth and round shape, reinforced with Arai’s proprietary peripheral belt, to slide across surfaces and glance-off obstacles. The VAS-VC shield system, with its retro mechanical look, further enhances glancing off performance by lowering the visor pivot point to maximize a smooth upper shell.

Although a nod to the past, the Concept-XE is very much a helmet of the present. Ready for a generation of modern riders that demand a new, old style - but with the performance and comfort only an Arai can provide.

Download Concept-XE instruction manual.

Concept-XE Features

General

Outer shell: PB e-cLc (Peripherally Belted e-Complex Laminate Construction)

The Concept-X’s outer shell uses a Peripherally Belted e-Complex Laminate Construction (PB e-cLc) for lightweight strength; it’s designed to glance off and spread impact forces. New materials have been used to substitute the AR-mat as middle layer, resulting in a substantial weight reduction while maintaining the same strength as the PB-cLc construction.

Variable Axis System (VAS)

With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard.

Ventilation

Concept-XE Ventilation

The Concept-XE’s sleek outer shell hides a secret; Arai’s internal ventilation system. Cooling air feeds into the visor brow vents and is drawn through the comfort liner and out three upper crown exhaust holes, via a hidden multi-stage air channel within the EPS liner, by the negative pressure created by the combined Venturi effect of the side exhaust ports and neckroll vent. Up front the six meshed slots close to demist and open for airflow.

Free Flow System (FFS)

Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air.

Hidden multi-stage air channel

Allows hot air to be pulled out of the helmet through 3 holes in the EPS liner to the Twin Venturi Exhaust ports.

Front ventilation

Brow vents

Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area.

Inner chin (bar) vent shutter

Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions.

Rear ventilation

Neck exhaust vent

To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet.

Side exhausts

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

Aerodynamics

Fixed Chin Spoiler

Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable.

Visor

VAS Max Vision Visor with De-Mist option

VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding.

Shield latch system

Borrowed from our F1 helmet, completely modified 3D moving shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves.

Pinlock insert lens

Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.

Interior

Antimicrobial Liner material

Helps maintain neutral acidity levels close to human skin and antibacterial consumption. With the aim of a softer, deeper and even more comfortable fit we developed a softer liner frame material. The liner also has adjustable temple padding that allows for a customized fit.

Replaceable Cheek pads/Ear cups

Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning, blot dry with a towel and let air dry completely before reassembly. Never machine wash or use heat to dry. Interior parts in different size thickness are available for a custom fit for every rider.

  • Remove by taking the frontside out first
  • Place back by inserting the backside first

Interior: Replaceable Interior

The complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Speaker pockets

Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included).

Facial Contour System (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

5mm ’’Peel Away’’ Ear cups/Cheek pads

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

5mm ’’Peel Away’’ Temple pad

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

Comfort

Emergency Release System (ERS)

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

Chincover (Fixed)

Attached to the bottom of the helmet, the chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further.

Breath guard

Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield.

Arai Features

Glancing Off

To minimize impact energy getting into the helmet, it’s crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact. Shells with sharp edges or vent ducts that don’t break off can reduce the helmet’s ability to slide, sending energy into the helmet, or even enhance rotational energy.

Five times inspected

Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.

Washable interior

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade

It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested

All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device

The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection

The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.

Strong outer shell, soft inner shell

Arai uses a very strong outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty

All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house Test

Arai helmets are designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE standard.

Approval

ECE R22-06

ECE R22-06 requires a much more stringent testing process than the previous ECE R22-05 and includes an oblique test to measure rotation.

Write Your Own Review
You're reviewing:Full Face Helmet Arai CONCEPT-XE Ha Yellow
Your Rating
Ask for information about this product
We found other products you might like!
©2021EM MOTO s.r.l. P.IVA 01863100432. All Rights Reserved.